Optomistic Products: leading in superior customer solutions for the automated testing of LEDs.

Fiber-Optic Probes - Which is Best For Your Test?

 

Our wide selection of fiber-optic probes were developed to suit our customer's specific applications.  For a complete catalog of our fiber-optic probes, download our Universal LightProbe Fiber-Optic Probe CatalogUniversal LightProbe Fiber-Optic Probe Catalog.  Below, you'll find a quick overview to assist you in deciding which is best for your test, or you can download the guide Which Is Best For Your Test?

Fiber-Optic Probes

Test Closely-spaced LEDs:  Choose 1.2mm diameter fiber-optic probes with non-contacting tips 

Test for More Refined Intensity Measurement: When intensity measurement is critical, choose an insulated, contacting spring-tipped probe to eliminate variations in intensity response, available only with a 3.4mm diameter contacting diameter tip

Test Three LEDs with a Single Sensor - Significant Cost Savings: Choose the popular "Trident" for the sequential test of 3 LEDs with one sensor available only with a 1.2mm diameter non-contacting tip

Test Dim LEDs / Compensate for Misalignment Errors:  Choose wide aperture fiber-optic probes which allow 4x the amount of light input as small-aperture probes available with either a 2.7mm diameter non-contacting tip, or 3.4mm diameter contacting tip

Test Side-Facing LEDs: Choose the "Periscope" fiber-optic probe, designed to test side-facing LEDs, available only with a 2.7mm diameter non-contacting tip

Install without Clamps: Choose rigid, stainless-steel encased probes, available with either a 2.7mm diameter non-contacting tip, or 3.4mm diameter contacting tip

Test Difficult to Access LEDs: Choose super-flex cables which allow for a tight bends in the cable, available with either a 2.7mm diameter non-contacting tip, or 3.4mm diameter contacting tip